SQ-702001 UV Primer for Vacuum Metallizing
Description
SQ-702001 is a UV-curable polyurethane acrylate primer/clear coat, designed for use as a primer in UV vacuum metallization on ABS/PC substrates. It features excellent plating compatibility, high leveling and film fullness, and resistance to boiling water.
Technical data
Appearance
| Transparent liquid
|
|---|
Viscosity (25ºC, Iwata #2 Cup, s)
| 9.2–9.8
|
Solids Content(%)
| 45 ± 2
|
Density (g/cm³, 25ºC)
| 0.90 ± 0.05
|
Solvent
| Aromatic and ester solvents
|
Features
Excellent adhesion to ABS, PC, and ABS/PC substrates
Superior vacuum plating performance
Boiling water resistance
Applications
Suitable for use as a UV primer for vacuum metallization on plastic substrates.
Construction process
1. Clean the substrate surface thoroughly using white spirit or alcohol.
2. Apply the primer in a crosswise spray pattern (film thickness: 15–20 μm).
3. Bake in an oven at approximately 65°C for 3–5 minutes to evaporate the solvent.
4. Cure under a mercury lamp with an energy dose of 600 mJ/cm².
5. Proceed to the next process step.
Precautions
1. Ensure the UV primer absorbs sufficient ultraviolet energy to achieve proper curing; insufficient curing may affect coating performance.
2. Do not return leftover primer to the original container. Store in a sealed, light-proof container at room temperature.
Storage
To prevent the product from polymerization and gelling, please keep it sealed and away from heat and light. Recommended storage temperature is not higher than 30°C. Unused products must be sealed and stored in a timely manner and cannot be stored in the open. Safe storage time is 6 months at room temperature( 25ºC) and under ventilation. 25KG/200KG/barrel
Tips: SQ-702001 offers excellent plating compatibility and good water resistance.
Note: Technical data represents typical values only. In view of the differences in formulas, production process, conditions, all the above statements must be adjusted according to the actual situation, our company does not make any promises. Our company reserves the right to reform its products without prior notice of any changes.
Lencolo Co., Ltd.
Contact Person:
Yuki
Tel/Whatsapp:
+86-180-2700-2837
Email:
yuki.yin@lencolo37.com
