Our Products

SQ-710002 High Elogation UV Transfer Coating

Description

SQ-710002 is a single-component UV-curable adhesive that can be molded onto PC, PET, TPU, or other film substrates using various textured or structural molds. It can be transferred manually in small batches using small molds or via automated, high-throughput structural rollers or textured film transfer systems. It is primarily used for creating textured decorative surfaces and forming housings for products such as mobile phones, laptops, and home appliances. The product features excellent release performance, high hardness, good metallization compatibility, excellent recoating performance, and strong UV-aging resistance.

Technical Data

Product Features

Offers excellent tensile deformation performance; the adhesive film has good stretchability and will not crack after high elongation, even on substrates with large deformations, with good transparency.

Offers excellent tensile deformation performance; the adhesive film has good stretchability and will not crack after high elongation, even on substrates with large deformations, with good transparency.

Excellent resistance to high/low temperatures, high humidity, chemical solvents, moisture, and UV exposure; the product maintains stable performance under harsh conditions.

Applications

Textured decoration and housing formation for products such as mobile phones, laptops, and home appliances.

Application Process

1. Clean the surface of the substrate.

2. Pour the adhesive into the metal mold and press the PC or PET film onto the mold. Use a rubber roller to press and level the adhesive, ensuring that air bubbles are removed and the bonding areas are fully covered.

3. Irradiate with a UV lamp at wavelengths of 265 or 395 nm. Keep the lamp as close as possible to the adhesive to accelerate curing.

4. Peel the PC or PET film from the metal mold. The adhesive layer will release completely and adhere to the PC or PET surface.

5. If the adhesive layer is not fully cured, continue UV irradiation until full curing is achieved.

Process Flow

Unwinding → Coating onto specially treated release film → Mold/roller pressing → UV curing → Demolding → Rewinding → Ink printing → Slitting → Forming → Injection molding → Peeling off surface polyester film → Spraying hard coat

Precautions

1. Ensure that the UV adhesive layer receives sufficient UV energy to achieve complete curing; inadequate irradiation may compromise the coating performance.

2. Do not pour leftover adhesive back into the original container. Store the remaining material in a sealed, light-proof condition at room temperature.

Storage Conditions

To prevent premature polymerization due to the high reactivity of this product, keep it tightly sealed and store away from heat sources and direct sunlight. It is recommended to maintain storage temperature below 30 °C. Unused product should be promptly resealed and must not be left open. Under ventilated conditions at 25 °C, the product has a safe storage period of 6 months. Available packaging: 1 kg / 5kg / 25 kg per drum

Tips: SQ-710002 is a high-stretch UV transfer coating with excellent tensile deformation performance. It does not crack on substrates with large deformations, offers high transparency, and is easy to process.