SQ-771001 UV Transfer Adhesive Primer
Description
SQ-771001 UV transfer adhesive primer is designed for use in the UV inkjet field as an adhesion-promoting primer for difficult-to-bond substrates such as glass, acrylic, metal, ceramic, and canvas. It can also be used as a bonding primer in transfer processes or as a hot stamping primer for substrate surfaces before printing.
Technical data
Appearance
| Colorless transparent liquid
|
|---|
Viscosity (25ºC, CPS)
| 8 ~ 30
|
Density (g/cm3, 25℃）
| 1.03±0.05
|
Printing method
| UV inkjet
|
Drying method
| LED 365–405 nm
|
Curing energy mj/cm²
| 120 ~ 500
|
Acid value (mgKOH/g)
| ≤5
|
UV component (%)
| 100
|
Adhesion: 3M 600# Tape
| Peeling ≤ 2%
|
Note: The above performance parameters can be customized according to customer requirements
Features
Fast curing with excellent film formation
Superior adhesion to a wide range of substrates
Low residual odor after curing, non-irritating smell
High printability and excellent transfer performance
Applications
Adhesion primer for UV inkjet printing on glass, acrylic, metal, ceramic, and canvas; Bonding primer for transfer printing processes; Hot stamping primer for various substrates prior to printing etc.
Storage
To prevent the product from polymerization and gelling, please keep it sealed and away from heat and light. Recommended storage temperature is not higher than 30°C. Unused products must be sealed and stored in a timely manner and cannot be stored in the open. Safe storage time is 6 months at room temperature( 25ºC) and under ventilation. 5KG/25KG/200KG/barrel
Attention
Once Opened: Use within a reasonable time frame to maintain ink consistency and quality.
Ensure the container is properly resealed after each use to avoid skinning or drying out.
Precautions: For industrial use only. Avoid contact with skin. Use protective gloves if necessary.
Tips: SQ-771001 is ideal for applications requiring strong adhesion on challenging substrates, such as glass, acrylic, metal, ceramic, and canvas, as well as for transfer printing and hot stamping processes where reliable bonding is critical.
Note: Technical data represents typical values only. In view of the differences in formulas, production process, conditions, all the above statements must be adjusted according to the actual situation, our company does not make any promises. Our company reserves the right to reform its products without prior notice of any changes.
Lencolo Co., Ltd.
Contact Person:
Yuki
Tel/Whatsapp:
+86-180-2700-2837
Email:
yuki.yin@lencolo37.com
